|
|
Item Posts
Sort Order
|
|
|
speed four gennie probs
|
gav1
New User
| Posts: 1
| Joined: 07/09
Posted: 07/04/09
02:36 AM
|
|
Hi there,I recently had a recon gennie installed.I broke down yesterday and got to a garage,where they tested the gennie where it plugs into the regulator rectifier and told me it wasnt charging 1 out of 3 fazers.The battery seemed to die over a couple of days,but when I revved engine the light s got brighter.Have they missed something,is there a loose connection?.Any advice please?cheers gav1 
|
|
|
|
joegresh
User
| Posts: 54
| Joined: 03/09
Posted: 07/04/09
04:43 AM
|
|
They probably meant 3 Phases-the three windings in the stator. One could be bad and the bike won't charge right. Usually, the output between each set of two wires at the 3 wire plug (unplugged) will be 50-ish volts AC with the engine revving. Look in your manual for the exact numbers.
Could be a loose connection, melted plug, bad crimp in the harness or reg/rectfier if the stator checks out.
If the bike's a early Vmax it has all these problems.
Joe
|
|
|
|
|
|
|
|
|